All three Xbox One models feature wireless controllers that can also be plugged in via USB. While there are two different main Xbox One controller designs, in addition to an Elite version, they're all compatible with all three types of Xbox One consoles. You can also sync a wireless Xbox One controller to a PC, but the best way to do it will depend on the version of Windows you have installed.
The basic steps involved in syncing an Xbox One controller are:
Remove D-Pad Screws - Locate the two screws on the back of the D-Pad. Using a small phillips head screwdriver, unscrew the two silver screws and place off to the side. Release Notches in D-Pad - Using a small flat head screwdriver, press the tabs towards the center of the D-Pad. The D-Pad will just drop out.
Turn On Your Xbox One
Turn your Xbox One on by pressing the Xbox button on the front. The button is located on the right side of the front of the console regardless of whether you have an Xbox One, Xbox One S or Xbox One X.
When the console has turned on, the button will illuminate. You can let go of the button and go to the next step.
Turn on Your Xbox One Controller
Turn on your Xbox One controller by pressing on the Xbox button, which is located on the front of the controller, in the center, near the top. The button will illuminate when the controller is on.
If the button doesn't illuminate, make sure that you have batteries in the controller. If you don't have batteries, then proceed to step six for information about connecting an Xbox One controller via USB.
Press the Connect Button on Your Xbox One
The connect button is what tells your Xbox One that you are trying to connect a controller. The specific location and appearance will depend on the type of Xbox One that you have.
Xbox One: The connect button is located around the corner from the slot where you insert games.
Xbox One S: The connect button is located on the front of the console, on the right side, below the power button.
Xbox One X: The connect button is located on the front of the console, on the right side, right next to the USB port. 2007 nissan altima manual download.
Once you have located the connect button, press and release it.
Make sure you have your Xbox One controller handy. After pressing the connect button on the Xbox One, you need to immediately proceed to the next step and complete it within 20 seconds.
Press the Connect Button on Your Xbox One Controller
The connect button on your Xbox One controller lets the Xbox One know that it is ready to connect. It is located on the top of the controller, on the same side as the triggers and USB port.
Once you have located the connect button on your controller, press and hold it. The Xbox button on your controller will flash, which means it's looking for a console to connect to.
https://piatlo.weebly.com/blog/pharaoh-and-cleopatra-game-iso-download. If your Xbox One controller successfully connects to your console, the Xbox button will stop flashing and remain lit. You can let go of the connect button and then go back to step three and repeat the process for any additional controllers that you want to connect.
You must press the connect button on the Xbox One controller within 20 seconds of pressing the connect button on the Xbox One console. If you don't, you will have to start the process over again.
How to Sync an Xbox One Controller to a PC
The Xbox One controller is also a great way to play games on a PC. If you want to connect an Xbox One controller to your computer, the process will depend on how old the controller is.
Xbox Controller Reinstall Drivers
Older Xbox One controllers require a special USB dongle. You can buy the dongle separately, and it also comes packaged with some Xbox One controllers.
To connect one of these controllers:
Newer Xbox One controllers can connect to a PC using the dongle or Bluetooth. To connect an Xbox One controller to your PC using Bluetooth:
How to Connect an Xbox One Controller Via USB
You can also connect your Xbox One controller to an Xbox One console or a PC via USB, and it's an extremely easy two step process:
After months of promises, Microsoft finally released Windows drivers for its Xbox One controller, allowing it to pull double duty as wired controller for PC gaming.
Unlike the Xbox 360 wireless controller, which required a separate dongle for PC use, all you need to use the Xbox One controller on PC is a standard Micro-USB cable. The wired connection provides the power, so you don’t even need batteries. Unfortunately, you can’t use the Xbox One controller wirelessly on a PC at this time.
Driver Installation
To set up the controller, head to Major Nelson’s blog and download the drivers for either a 32-bit (x86) or 64-bit (x64) machine. (If you’re unsure which file to grab, open Control Panel, type
About in the search bar and click System. Then, look under 'System Type.')
Open the file you just downloaded. Amusingly enough, Windows will show an 'unknown publisher' warning, even though the drivers are coming from Microsoft. Click Run in the box that pops up. You don’t have to plug in the controller to install the drivers.
A setup wizard should appear. Read and accept the license agreement, wait for the installation to finish, then click Finish.
Now, plug in your Xbox One controller. It may vibrate briefly, and you should see a 'driver software installed successfully' message on the System Tray.
At this point, you should be ready to play. Games that support Microsoft’s Xbox 360 controller should automatically recognize the Xbox One controller without any additional setup (with some exceptions described below).
Potential issues
The biggest problem is that several of the games I tested would not recognize the controller, including Dark Souls II, Transistor and Eldritch. The controller did recognize several other games, including Dishonored, Super Meat Boy and Trials Evolution. Uninstalling and reinstalling the drivers did not help, so hopefully this is just a temporary issue that Microsoft and game developers can resolve through updates.
![]()
Also, the first time I installed the driver, Windows 7 showed a 'Runtime Error' after plugging in the controller, followed by an 'XboxStat.exe has stopped working' error. The controller still worked, but the message was a nuisance. These messages went away after reinstalling the driver.
Xbox One Controller Driver Windows 7
Finally, keep in mind that plugging the controller into a PC will break its wireless connection to the Xbox One. You’ll have to plug the controller back into the console via USB to pair them again.
To comment on this article and other PCWorld content, visit our Facebook page or our Twitter feed.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |